Ignition Controls

Hot Surface Igniter Furnace

High Volt Cable for Y75TC2 * High Voltage Cable For Y75TC2. 36 Long.

Sensor Probe Cable for Y75TC2 * Replacement Sensor Cable For Y75TC-2 36 Long With Two 1/4 Spade Connections

Sensor Probe Cable For Y75RJ1 * Replacement Sensor Cable For Y75Rj-1 36 Long With One 1/4 And One 3/16 Connection.

Replacement Flame Sensor * Replacement Flame Sensor For G60 G65 And G66 Electronic Ignition Control Systems. Replaces Y75Aa With 90 degrees Connector. Two Per Pack.

Replacement Flame Sensor * Replacement Flame Sensor For G60 G65 And G66 Electronic Ignition Control Systems. Replaces Y75Ba With Straight Connector. Two Per Pack.

Sensing Probe * Flame Sensing Probe And 27 Cable For Johnson Ignition Controls.

Test Meter Adaptor * Test Meter Adaptor For Use With Y99AU-2.Allows Measurement Of Micro amperage On A DcC Voltage Scale.

Electrode w/Univ Mount Bracket * Ignition Electrode With Mounting Strap. 24 Lead With Slip-On Bracket.

Universal Pilot Ignition Module With Lockout. 24V. Thermostat Reset. Shuts Off All Gas To Unit If Ignition Fails To occur After Three 60 Second Attempts.

Modernization Ignition Kit * Pilot Ignition Modernization Kit. 24V. Upgrades Old Style Heat Sensor Systems To Rectification. Includes Ignition Module Sensor Igniter Cables And Mounting Hardware.

Modernization Ignition Kit * Ignition Control For Non lockout Systems. Upgrades Old Style Heat Sensor Systems To Flame Rectification Type. Includes Ignition Control Wiring Harness Pilot Sensor & Instructions. Can Use Old Valve

Spark Ignition Module * Spark Ignition Module For Non-Lockout Flame Rectification Systems. Used In 712-016 & 712-017 Spark Ignition Kit.

Spark Ignition Module * Replacement Spark Ignition Unit Flame Rectification System Model SP735A Lockout Model 60 Second

Hot Surface Ign Module / RHeem * Replacement Hot surface Ignition Module Exact Replacement For Rheem 62-22578-01 Input Voltage 120/24Vac

Ignitor Board * Direct Spark Ignition Module. 24V Remote sensing. 15 Sec Pre purge 10 Sec. Trial For Ignition. 3 Tries For Ignition Thermostat reset.

Ignitor Board * Direct Spark Ignition System. 24V. Remote Flame Sensing. 3 Tries For Ignition. 30 Sec. Pre purge. 6.8 Sec. Trial For Ignition Blower Relay. Plastic Enclosure.

Direct Spark Ignition Systems. 24V. Remote Flame Sensing. 1 Try For Ignition 15 Sec Pre purge. 10 Sec Trial For Ignition. No Blower Relay. Plastic Enclosure.

Direct Spark Ignition System. 24V. Remote Flame Sensing. 1 Try For IgnitioN30 Sec. Pre purge. 4.7 Sec. Trial For Ignition Blower Relay. Plastic Enclosure.

Direct Spark Ignition Control. 24 Volts No Pre-Purge Remote Sensing 1 Try For Ignition. Stat Reset.

24v DSI,15secPP,4secTFI,3trys The Series 35-60 and 35-61 are 24 VAC Microprocessor Based Direct Spark Ignition Controls designed for use in all types of heating applications. The control utilizes a microprocessor to continually and safely monitor, analyze and control the proper operation of the gas burner. Value added features such as combustion blower control, LED diagnostics, automatic one hour reset, and flame current test pins highlight the controls benefits.

Direct Spark Ignition System. 24V. Remote Flame Sensing. 1 Try For Ignition 30 Sec. Pre purge. 6.8 Sec. Trial For Ignition. No Blower Relay. Plastic Enclosure.

Ignition System Board * Direct Spark Ignition Circuit Board 120Vintegral Flame Sensor. 1 Try For Ignition. 10Second Trial For Ignition. No Enclosure.

Direct Spark ignition control. 24 volts. No pre purge. 4 second TFI. 3 retries @ 5 minute delay. Replaces Johnson G760BAD-1 and G760BAD-2